|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
S/INT/XKD-0001/F/12/01/2007 page 1 / 2 F/GB Relais Statique/Montage sur rail DIN Solid State Relay for DIN rail fixation * Gamme pret a l'emploi: Relais montable sur rail DIN . * Pour tout type de charge. * Visualisation de commande par LED. * Sortie DC. * Haute immunite aux perturbations exterieures. * New generation of SSR for DIN rail fixation. * For all king of load. * Control visualization by LED. * DC Output. * High immunity level. XKD 3A/DC or AC control 3A/60VDC output or 1A/200VDC output Aplication typique/Typical application + 1+ 2-60VDC 3A 2-60VDC 3A +- celduc France celduc France 0,4 76,4 XKD 7x306 input VAC XKD 9x306 input VAC 3 AC/DC 1+ 2- 2Charge / Load (*) 4 29 0,4 12,20,2 17,20,2 53 0,4 - Types / Models DC OUTPUT XKD10120 XKD10306 XKD11306 XKD70306 XKD90306 DC input 5-30 30 5 1 30 1 1000 DC input 5-30 30 5 1 30 1 1000 DC input 3-30 48 3 1 30 1 600 AC/DC input AC/DC input Modeles / References Caracteristiques d'entree / Input characteristics (20C) Plage de tension de commande (Uc) / Input voltage range (Uc) Tension maximum de commande / Maximum control voltage Tension minimum de commande / Minimum control voltage Courant de fonctionnement/Operating current Courant maximum de commande / Maximum control current Tension de relachement/Release voltage Resistance interne / Input internal resistor 10-30 30 10 2 14 2 2000 90-240 240 90 2 5,7 15 41 000 Unit V V V mA mA V Caracteristiques generales /General characteristics Temperature de stockage / Storage temperature Temperature de fonctionnement /Operating temperature Tension d'isolement entree-sortie / Input-output isolation voltage Capacite entree-sortie/ Input-output capacity Poids/Weight Largeur / Width (fig.) - 40 a/to +105 -40 a/to +90 - 40 a/to +105 -40 a/to +90 - 40 a/to +105 -40 a/to +90 - 40 a/to +105 -40 a/to +90 - 40 a/to +105 -40 a/to +90 2500 8 30 12,2 2500 8 30 12,2 2500 8 30 12,2 2500 8 30 12,2 2500 8 30 17,2 Unit C C VRMS pF g mm Proud to serve you All technical caracteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis. r celduc e l a i s S/INT/XKD-0001/F/12/01/2007 page 2 / 2 F/GB Types / Models DC OUTPUT DC output Continue DC DC output Continue DC DC output Continue DC DC OUTPUT Unit DC output Continue DC DC output Continue DC Modeles / References Caracteristiques de sortie/Output characteristics(20C) Types / Models Plage tension de fonctionnement / Operating range Tension crete / Peak voltage Courant nominal (voir les caracteristiques thermiques) / Nominal current (see thermal curves) Courant de surcharge accidentel admissible maximum (10ms) : / Maximum accidental overload current (10ms) : ITSM Chute tension directe (In) / On state voltage drop (IN) Courant de fuite etat bloque (@Un/50Hz) / Off state leakage current (@Un/50Hz) Courant de charge minimum / Minimum load current Temps de fermeture / Turn on time Temps d'ouverture / Turn off time Frequence d'utilisation / Operating frequency dv/dt etat bloque / Off state dv/dt Homologation / Approval XKD10120 XKD10306 XKD11306 XKD70306 XKD90306 2 a/to 220 220 1 3 1,6 0,3 3 0,2 0,8 0-500 (DC) 200 2 a/to 60 60 3 5 1,6 2 a/to 60 60 3 5 1,6 2 a/to 60 60 3 10 1,6 1 5 20 20 10 200 2 a/to 60 60 3 10 1,6 1 5 20 20 10 200 V V A A V mA mA ms ms Hz V/s 0,3 0,3 3 3 0,2 0,2 0,8 0,8 0-500 (DC) 0-500 (DC) 200 200 Fig.2 Caracteristiques thermiques / thermal curves : 6 5 Courant commute (A eff) / Switched current (A RMS) 4 3 2 1 0 0 10 20 30 40 50 60 70 80 90 100 Temperature ambiante (C) / Ambient temperature (C) Ucmin Ucmin/max:Voir plage de tension de commande / See input voltage range Uc mi n Ucm ax XKD10306 Ucmax XKD10120 Precautions : * Les relais a semiconducteurs ne procurent pas d'isolation galvanique entre le reseau et la charge. * Sur charges inductives prevoir une diode de roue libre (ou un ecreteur de surtension). * Dans le cas de plusieurs modules cote a cote, prevoir un derating en courant. Cautions : * Semiconductor relays don't provide any galvanic insulation between the load and the mains. * On inductive load put a free-wheeling diode (or clamp). * In case of many SSRs side by side, take a derating current in to account. celduc r e l a i s www.celduc.com Rue Ampere B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tel. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tel. +33 (0) 4 77 53 90 19 |
Price & Availability of XKD10306 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |